TDK Stereo System NX 7CD User Manual

2.1 CH. CD MICRO HI-FI SYSTEM  
NX-7CD (CD + MP3 + USB + SD/MMC)  
 
CONTROLS  
REMOTE CONTROL  
MAIN UNIT  
CONNECTION  
2
 
1.  
button:  
13. REPEAT button:  
to repeat a track/folder/all the tracks.  
14. INTRO button:  
to switch the system on or to standby  
mode.  
to play the first 10 seconds of each  
track.  
2. FUNCTION button:  
to select Tuner, CD, USB/SD or AUX.  
15. MUTE button:  
3. PLAY (  
) button  
interrupts and resumes sound  
reproduction.  
to start playback or pause during play  
mode.  
16. BBS button:  
4. STOP button:  
to enhance the bass.  
17. TIMER button:  
to stop playback or to clear a program.  
Note:  
to activate/deactivate the timer function.  
18. SLEEP button:  
to activate/deactivate or set the sleep  
timer.  
In USB/SD mode, press and hold down  
for a few seconds to changing playback  
from USB or SD.  
5. SKIP/TUNING (  
buttons:  
/
)
19. EQ button:  
to select the preferred equalizer mode.  
(PASS, CLASSIC, ROCK, POP, JAZZ)  
20. MEM/CLK SET button:  
for CD, MP3 playback:  
to program tracks  
for CD/MP3 playback:  
to select a desired track.  
for Tuner:  
to tune to a lower or higher radio  
frequency.  
for Tuner:  
6.  
button:  
to program preset radio stations.  
for Clock:  
to open and close CD door.  
7. VOLUME (  
/
) buttons:  
to set the clock function.  
21. RDM button:  
to increase or decrease the volume.  
8. Phones Jack:  
to activate the random play function.  
22. BAND button:  
connects to headphones.  
9. SD CARD Slot:  
to select waveband: FM or AM.  
23. AUX Jack:  
to read SD memory card.  
10. USB Port:  
connecting other equipment to the  
system.  
connects a USB mass storage class  
device.  
24. SUBWOOFER CABLE Jack:  
connecting Main Unit and Subwoofer by  
using SUBWOOFER CABLE (13 pins).  
25. RCA Jacks:  
11. FIND/ST/MO button:  
for MP3 playback:  
to search track name, album.  
for Tuner:  
connects Left and Right speakers.  
to select stereo or mono.  
12. FOLDER/PRESET (  
/
) buttons:  
for MP3 playback:  
to select desired folder.  
for Tuner:  
to select a preset radio station.  
3
 
BASIC FUNCTIONS  
Switching the system on  
Checking the Clock Time  
Press , the system will switch to the last  
During power on. Press and hold down on  
MEM/CLK SET for more than 1 second,  
the display shows current clock time.  
To resume normal display, press MEM/CLK  
SET.  
Press FUNCTION(Tuner/CD/USB-SD/  
AUX), the system will switch to the  
Switching the system to standby  
Playable media and files  
The system is able to playback following  
types of media and files.  
Media:  
Press  
, the system will switch to  
All pre-recorded audio CDs  
All finalised audio CDR and audio CDRW  
discs  
The volume level, last selected function  
and tuner presets will be retained in the  
• MP3-CDs (CD-ROMs with MP3 tracks)  
• USB mass storage class device such as  
a USB flash memory device, MP3 Player  
etc.  
SD memory card  
File Format:  
•Press VOLUME  
decrease the volume level. Display shows  
the volume level “VOL” and a number  
/
to increase or  
• MP3 only  
To switch off the volume temporarily  
•Press MUTE on remote control. Playback  
will continue without sound.  
Note:  
This System may not playback some USB  
mass storage class devices.  
This System may not playback some files  
even though their formats are listed above.  
To restore the volume, press MUTE again  
or increase the volume level.  
Press EQ repeatedly to select the desired  
equalizer mode: PASS, CLASSIC, ROCK,  
Press BBS to switch on the bass  
Connecting other equipment  
Connect the audio OUT terminals of a TV,  
VCR, Laser Disc Player, DVD Player or CD  
Recorder to the AUX jack by using audio  
cords with mini plugs (not supplied).  
4
 
OPERATIONS  
3. The total numbers of folder and track  
are displayed.  
Playing a disc  
1. Select CD function.  
4. Press PLAY (  
To interrupt playback  
Press PLAY (  
time flashes.  
) to start playback.  
2. Press  
is displayed.  
3. Insert a disc with the printed side facing  
up and press  
to open the CD door. OPEN”  
). The current track  
to close the CD door.  
“CD READ” is displayed as the CD  
player scans the contents of a disc, and  
then the total number of tracks and  
playing time are shown.  
To resume playback, press PLAY (  
again.  
)
To stop playback  
Press STOP ( ).  
NOTE:  
4. Press PLAY (  
To interrupt playback  
Press PLAY (  
time flashes.  
) to start playback.  
Connect the USB mass storage class device directly to  
the system. Using a USB hub may result in malfunction.  
). The current track  
To resume playback, press PLAY (  
again.  
)
Selecting a different track  
Press  
or  
repeatedly until the  
To stop playback  
Press STOP ( ).  
desired track number appears in the  
display.  
Playing back from SD memory card  
This system is equipped with a SD card slot  
for SD memory card.  
1. Insert a SD memory card to SD slot.  
2. Select USB-CARD function.  
3. The total numbers of folder and track  
are displayed.  
Locating a particular portion  
Press and hold down on  
or  
until  
) on  
the portion you want is reached.  
Selecting a desired folder/track  
To select a desired album  
Press FOLDER/PRESET (  
remote control repeatedly.  
To select a desired track  
or  
4. Press PLAY (  
To interrupt playback  
Press PLAY (  
time flashes.  
) to start playback.  
). The current track  
Press  
or  
repeatedly until the  
desired track number appear in the  
display.  
If playback is stopped, press PLAY (  
) to start playback.  
To resume playback, press PLAY (  
again.  
)
To stop playback  
Press STOP ( ).  
Searching for a name of track/folder  
Playing back from the USB mass  
storage class device  
This system is equipped with a USB port to  
connect a USB mass storage class device.  
1. Connect a USB mass storage class  
device to USB port.  
To select the track by searching for its  
name. (for MP3-CD only)  
1. Press FIND/ST/MO once on the remote  
control. An initial letter of a track name  
and a track name are displayed.  
2. Press  
or  
repeatedly to select  
2. Select USB-CARD function.  
a initial letter of track name.  
5
 
OPERATIONS  
3. Press and hold  
or  
, and then  
REPEAT ALL:  
you can select the track that has same  
initial letter selected above by pressing  
to repeat the all of tracks. “REPEAT ALL”  
is displayed.  
the  
or  
.
REPEAT FOLDER (playback MP3):  
to repeat all the tracks in the folder.  
“REPEAT FOLDER” is displayed.  
To cancel repeat play, press REPEAT  
button repeatedly until the repeat indicator  
goes off.  
4. Press PLAY (  
) to start playback.  
To select the folder by searching for its  
name.  
1. In SD card and USB mass storage class  
device playback mode, pressing FIND/  
ST/MO once. In MP3-CD playback  
mode, press FIND/ST/MO twice. The  
name of folder is displayed.  
2. Press  
which included your desired track.  
3. Press PLAY ( ) to start playback  
Programming the disc tracks  
Programming tracks is possible when  
playback is stopped. Up to 64 tracks can  
be stored in the memory in any order.  
Playback Audio CD:  
or  
to search the folder  
the first track into the folder.  
1. Press MEM/CLK SET on remote control  
to enter the programming mode.  
2. Press  
or  
repeatedly to select  
Text display (for MP3 playback)  
Press and hold down FIND/ST/MO on  
remote control for more than 1 second  
during playback, the information about the  
current track is displayed.  
Press and hold down FIND/ST/MO on  
remote control for more than 1 second to  
cancel the MP3 information mode.  
your desired track number.  
3. Press MEM/CLK SET to confirm the  
track number to be stored.  
4. Repeat step 2-3 to select and store all  
desired tracks.  
Playback MP3:  
1. Press MEM/CLK SET to enter the  
programming mode. The folder no. is  
flashing.  
Different play modes: RANDOM and  
2. Press  
your desired folder.  
3. Press MEM/CLK SET to confirm the  
folder and then the track no. is flashing.  
4. Press  
your desired track.  
5. Press MEM/CLK SET to confirm the  
track number to be stored.  
6. Repeat step 2-5 to select and store all  
desired tracks.  
To start playback of your program, press  
PLAY (  
To cancel program, press STOP button  
once when playback is stop or twice during  
playback.  
or  
repeatedly to select  
REPEAT  
You can select and change the various play  
modes before or during playback.  
RANDOM mode:  
Press RDM on the remote control, all of  
tracks are played in random order.  
Press RDM again to cancel random  
mode.  
or  
repeatedly to select  
REPEAT mode:  
Press REPEAT on remote control repeatedly  
to activate/deactivate or select repeat play  
mode.  
REPEAT:  
to repeat the current track. “REPEAT” is  
displayed.  
).  
6
 
CLOCK/TIMER  
6. Press TIMER on remote control, “VOL  
Clock setting  
XX” is displayed. Press  
adjust the volume level.  
or  
to  
1. In standby mode, press and hold MEM/  
CLK SET, “12HOUR” or “24HOUR” is  
7. Press TIMER on remote control to  
confirm the timer.  
displayed and flashing. Press  
to change the hour mode.  
or  
Press TIMER once on remote control.  
Display shows “TIMER” if activated and  
disappears if deactivated.  
2. Press MEM/CLK SET, the clock digits  
for the hours flash. Press  
to set the hours.  
or  
Note:  
3. Press MEM/CLK SET, the clock digits  
for the minutes flash. Press  
to set the minutes.  
When the OFF time is same as the ON  
time, display shows “ERROR”and then  
returns to timer setting for revising the OFF  
time. In this case do not press the timer  
button for several seconds to let the timer  
setting mode return to normal. Then, you  
can re-enter new timer start from step 1.  
If you selected CD mode for the source  
of timer ON, a CD/MP3-CD disc must be  
loaded into the system. In case you forget  
to load a CD/MP3-CD disc into the CD  
compartment. The system will also turn  
on at the specified time but will change  
to Tuner mode automatically.  
4. PressMEM/CLK SET to confirm the  
time.  
Timer setting  
The timer enables the system to switch on  
and off in CD or Tuner mode at the specified  
time as an alarm clock. The clock time  
needs to be set first before the timer can  
beused.  
1. Press and hold TIMER on remote  
control until “TIMER” and “ON” are  
displayed. The clock digits for the hours  
flash. Press  
or  
to set the  
Sleep timer setting  
hours of ON time  
The sleep timer enables the system to  
switch off by itself after a set period of time.  
1. Press SLEEP on remote control  
repeatedly to select a preset time. The  
selections from 90 to 10 minutes,  
decreasing in 10 minute increments.  
2. Once the sleep time is selected,  
“SLEEP” and the selected time appear  
constant on the display.  
2. Press TIMER on remote control. The  
clock digits for the minutes flash. Press  
or  
to set the minutes of ON  
time.  
3. Press TIMER on remote control.  
“TIMER” and “OFF” are displayed and  
the clock digits for the hours flash. Press  
or  
to set the hours of OFF  
time.  
3. To deactivate the sleep timer, press  
SLEEP repeatedly on remote control  
until “SLEEP” and timer goes off.  
4. Press TIMER on remote control. The  
clock digits for the minutes flash. Press  
or  
to set the minutes of OFF  
time.  
5. Press TIMER on remote control.  
“TUNER” or “CD” is displayed. Press  
or  
to select your desired  
source which will be started at the set  
time.  
7
 
RADIO  
SPECIFICATIONS  
Supply Voltage  
:230V AC/50Hz  
Tuning to radio stations  
Power Consumption:40W  
Radio Frequency Range:FM 87.5 - 108.0 MHz  
MW 522 - 1620 kHz  
1. Press FUNCTION(Tuner/CD/AUX/  
USB-SD) to select Tuner.  
2. Press BAND to select the desired  
waveband: FM or MW.  
Power Output  
(Subwoofer  
:
Typical 15W at 4ohm  
Speaker, THD = 10%  
Typical 7.5W at 8ohm  
Speaker, THD = 10%  
3. Press down on  
or  
and release  
it. The frequency display begins change  
until a radio station with sufficient signal  
strength is found. If a FM station is  
received in stereo, is shown.  
(Speaker  
:
Dimensions (H x W x D):  
Main Unit  
Subwoofer  
Satellite Speaker  
: 160 x 220 x 80 mm  
4. Repeat step 3 if necessary until you find  
the desired station.  
:
:
225 x 130 x 230 mm  
160 x 193 x 60 mm  
To tune to a weak station, press  
or  
briefly and repeatedly until you have  
found optimal reception.  
Net Weight  
:
5.4kg  
Programming radio stations  
You can store 30 FM and 10 MW stations  
to memories respectively.  
1. Tune to your desired station (refer to  
Tuning to radio station”).  
2. Press MEM/CLK SET, preset no. is  
flashing.  
3. Press FOLDER/PRESET (  
or ) to  
select your desired preset no.  
4. Press MEM/CLK SET again to confirm  
the station to be stored.  
5. Repeat the above steps to store other  
stations.  
Tuning to preset radio stations  
Press FOLDER/PRESET (  
or ) until  
the desired preset station is displayed.  
8
 
Imation Asia Pacific Pte Ltd.  
23,New Industrial Road,  
Imation is a registered trademark of Imation Corp.  
#03-01 Century Industrial Building,  
Singapore, 536209  
The TDK Life on Record logo is a trademark of TDK  
Corporation and is used under a trademark license  
from TDK Corporation.  
*NXT is the trademark or registered trademark of New  
Transducers Limited in the U.K.  
AP001239-A  
 

Topcom Heart Rate Monitor HB 8M00 User Manual
Toro Sprinkler FLX34 User Manual
Toshiba Camera Accessories JK H01A User Manual
Toshiba Personal Computer A205 S7458 User Manual
Toshiba Printer B 570 QP Series User Manual
Uniden Cordless Telephone XC 320 User Manual
Univex Home Safety Product ARCBB200WSNG User Manual
Verbatim Computer Drive 49174 User Manual
ViewSonic Projector PJ658 User Manual
Vita Mix Blender 102866 User Manual